Windows 10 Network Devices Disappear

Recently after Windows 10 updates all of my physical and wireless network devices disappeared. I could not connect even with a new USB to GB network adapter. I tried deleting and reinstalling the drivers to no avail. The devices showed in device manager, however they were not accessible in network and sharing center. The Windows updates would not uninstall as they were now part of the OS.

After researching I found that forcing a reset of the network settings appeared to fix the issue. To do so open a command prompt as an administrator and run the following commands:

Netcfg -v -u dni_dne

Netcfg -d

Then restart the system

Comments

Post a Comment

Popular posts from this blog

FRS to DFSR Post Cleanup “File Replication NtFrs Stopped”

Image
After successfully migrating from FRS to DFSR you get the File Replication NtFrs service is Stopped error on the local servers AD DS Services list. In the Event logs you may see Event id 13575 13577. You can confirm your migration completed by opening a cmd prompt as administrator and typing in: dfsrmig /getmigrationstate After your migration to DFSR is completed and you have given your servers ample time to propagate this service is no longer required. Since it is set to “Automatic”, as shown below” it shows in logs as a false positive error. Edit the File Replication Service and change it to “Disabled”, as shown below: Once it is listed as “Disabled” it will no longer show in the Console as an “error” Note : it may take some time to clear from the active view
Read more

Domain Migration SubinACL /Migratetodomain How To:

Caution : DO NOT run this on Domain Controller C:\ and only run on roaming profiles folders, or my docs shares day of migration to avoid ownership change issues. Confirm Domain trust is in place and users and groups have been migrated Test ping of olddomain.org from new domain Test ping of newdomain.org from olddomain Add newdomain.org domain controller host records to olddomain.org including reverse DNS records Confirm the user running the app is a domain admin in BOTH domains Download SubinACL here: http://www.microsoft.com/en-us/download/details.aspx?id=23510 /Migratetodomain- command will add the permissions of the new user to the old files and folders for example if jimbob@olddomain.org was migrated to the new domain jimbob@newdomain.org and you run the command below any file or folder in that path that has jimbob@olddomain.org will add Jimbob@newdomain.org with the exact same permissions. This is a safer way to migrate by keeping the old and new permissions intact while a...
Read more

How to configure HP LaserJet Printer IPsec Encryption

Image
  I always recommend using a static IP for network printers. Once you have that configured use the printers web interface by going to that IP address using internet explorer. Select the” Networking” Tab > “IPsec/Firewall” as shown below: First we will add a rule to allow unencrypted traffic from all connections we will later define IPsec rules specific to the print server. You can set encrypted for all but keep in mind if it fails you will have a harder time remotely repairing it. Select “Add Rules” > “All IP Addresses” as shown below: Select “All Services” >”Next” as shown below: Select “Allow traffic…” >”Next” as shown below: Select “Finish” >”Next” as shown below: Select “OK” as shown below: It should take you back to the ” Networking” Tab > “IPsec/Firewall” as shown below: Note: “Enable IPsec/Firewall” is unchecked Now we will add an Encrypted Rule: Select “Add Rules” > “New” as shown below: Name the Rule, Specify the local and remote IP Addresses ...
Read more